AA401 is designed for industrial rope access (abseiling) and to support a fall arrest load of 15 kN in 360° direction provided a suitable personal shock absorber is used. Intended as a temporary anchor with an approved fixing or as a secondary eye in a through bolt system AA400T
Material Used:
Investment Cast 316 Stainless Steel
Finish:
Electro polished
Abseil Capacity:
15kN
Fall Arrest Capacity:
15 kN
Dimensions:
• Height – 50 mm
• Eye Diameter – 45 mm x 26 mm
• Weight – 355 g
Fixing Details:
• 1 x Through bolt M16 (HOLE 18 DIA)
• 1 x Chemical HILTI HVU2 or equivalent M16 (HOLE 18 DIA)
Things To Know:
AA401 is designed for installation in concrete and steel. It has been specifically developed for applications in rope access (abseiling) and
to support a multi directional fall arrest load of 15 kN provided a suitable personal shock absorber is used. It is recommended to use
a permanent locking agent such as Loctite 277 or equivalent when installing on an approved strength threaded rod without welding.
Fixing Options:
• Through bolt M16 (HOLE 18 DIA)
• Chemical HILTI HVU2 M16 or equivalent (HOLE 18 DIA)
Concrete Specifications:
Min. concrete strength: 25 Mpa
Min. slab thickness: 150 mm
Min. distance to edge: 200 mm
Min. distance to another anchor: 200mm
Note:
Edge distances less than the stated minimum may be permitted where verified by anchor manufacturer design (e.g. Hilti). Verification
must be based on project-specific parameters including concrete strength, embedment depth, anchor size, and edge condition, with
documented capacity calculations.
Loading:
The anchor is designed to accommodate multi-directional loading typical of fall arrest and rope access systems.
Tools Needed For Installation:
Rotary hammer drill, masonry drill bit 18, air pump, cleaning brush
Maintenance:
Inspection and load testing required by competent person at intervals not exceeding 12 months as specified in AS 1891.4:2025, and ISO 22846 (2020).
Product Warranty:
The AA401 Eye Nut comes with a 10-year warranty from the date of purchase, provided it is correctly installed, used, and maintained in accordance with the manufacturer’s specifications and recommendations.