- Must be installed by qualified, certified professionals
- Compatible with standard chemical anchors
- Requires M12 Hilti HVU2 capsule or equivalent injectable adhesive
- Recommended tools: Rotary hammer drill, blow-out pump, chemical dispensing gun, torque wrench
- Annual inspections and load testing by a competent person are mandatory under AS/NZS regulations
Material: 316 Stainless Steel
Overall Length: 125 mm
Diameter: 12 mm
Maximum Plate Thickness: 10 mm
Minimum Embedment: 95 mm
Installation Tourque: 50 Nm
Minimum Edge Distance: 150 mm
Minimum Fixture Spacing: 200mm
- Commercial and residential rooftops
- High-rise balconies and facades
- Rope access entry points
Installation & Maintenance
Tips for Installers:
- Always clean and blow out drilled holes thoroughly before chemical anchoring.
- Document installation for traceability and certification purposes.